Developer's guide#

Getting Mainflux#

Mainflux source can be found in the official Mainflux GitHub repository. You should fork this repository in order to make changes to the project. The forked version of the repository should be cloned using the following:

git clone <forked repository> $SOMEPATH/mainflux
cd $SOMEPATH/mainflux

Note: If your $SOMEPATH is equal to $GOPATH/src/github.com/MainfluxLabs/mainflux, make sure that your $GOROOT and $GOPATH do not overlap (otherwise, go modules won't work).

Building#

Prerequisites#

Make sure that you have Protocol Buffers (version 3.19.1) compiler (protoc) installed.

Go Protobuf installation instructions are here. Go Protobuf uses C bindings, so you will need to install C++ protobuf as a prerequisite. Mainflux uses Protocol Buffers for Go with Gadgets to generate faster marshaling and unmarshaling Go code. Protocol Buffers for Go with Gadgets installation instructions can be found here.

A copy of Go (version 1.17.5) and docker template (version 3.7) will also need to be installed on your system.

If any of these versions seem outdated, the latest can always be found in our CI script.

Build All Services#

Use the GNU Make tool to build all Mainflux services:

make

Build artifacts will be put in the build directory.

N.B. All Mainflux services are built as a statically linked binaries. This way they can be portable (transferred to any platform just by placing them there and running them) as they contain all needed libraries and do not relay on shared system libraries. This helps creating FROM scratch dockers.

Build Individual Microservice#

Individual microservices can be built with:

make <microservice_name>

For example:

make http

will build the HTTP Adapter microservice.

Building Dockers#

Dockers can be built with:

make dockers

or individually with:

make docker_<microservice_name>

For example:

make docker_http

N.B. Mainflux creates FROM scratch docker containers which are compact and small in size.

N.B. The things-db and users-db containers are built from a vanilla PostgreSQL docker image downloaded from docker hub which does not persist the data when these containers are rebuilt. Thus, rebuilding of all docker containers with make dockers or rebuilding the things-db and users-db containers separately with make docker_things-db and make docker_users-db respectively, will cause data loss. All your users, things, channels and connections between them will be lost! As we use this setup only for development, we don't guarantee any permanent data persistence. Though, in order to enable data retention, we have configured persistent volumes for each container that stores some data. If you want to update your Mainflux dockerized installation and want to keep your data, use make cleandocker to clean the containers and images and keep the data (stored in docker persistent volumes) and then make run to update the images and the containers. Check the Cleaning up your dockerized Mainflux setup section for details. Please note that this kind of updating might not work if there are database changes.

Building Docker images for development#

In order to speed up build process, you can use commands such as:

make dockers_dev

or individually with

make docker_dev_<microservice_name>

Commands make dockers and make dockers_dev are similar. The main difference is that building images in the development mode is done on the local machine, rather than an intermediate image, which makes building images much faster. Before running this command, corresponding binary needs to be built in order to make changes visible. This can be done using make or make <service_name> command. Commands make dockers_dev and make docker_dev_<service_name> should be used only for development to speed up the process of image building. For deployment images, commands from section above should be used.

Suggested workflow#

When the project is first cloned to your system, you will need to make sure and build all of the Mainflux services.

make
make dockers_dev

As you develop and test changes, only the services related to your changes will need to be rebuilt. This will reduce compile time and create a much more enjoyable development experience.

make <microservice_name>
make docker_dev_<microservice_name>
make run

Overriding the default docker-compose configuration#

Sometimes, depending on the use case and the user's needs it might be useful to override or add some extra parameters to the docker-compose configuration. These configuration changes can be done by specifying multiple compose files with the docker-compose command line option -f as described here. The following format of the docker-compose command can be used to extend or override the configuration:

docker-compose -f docker/docker-compose.yml -f docker/docker-compose.custom1.yml -f docker/docker-compose.custom2.yml up [-d]

In the command above each successive file overrides the previous parameters.

A practical example in our case would be to enable debugging and tracing in NATS so that we can see better how are the messages moving around.

docker-compose.nats-debugging.yml

version: "3"

services:
  nats:
    command: --debug -DV

When we have the override files in place, to compose the whole infrastructure including the persistent volumes we can execute:

docker-compose -f docker/docker-compose.yml -f docker/docker-compose.nats-debugging.yml up -d

Note: Please store your customizations to some folder outside the Mainflux's source folder and maybe add them to some other git repository. You can always apply your customizations by pointing to the right file using docker-compose -f ....

Cleaning up your dockerized Mainflux setup#

If you want to clean your whole dockerized Mainflux installation you can use the make pv=true cleandocker command. Please note that by default the make cleandocker command will stop and delete all of the containers and images, but NOT DELETE persistent volumes. If you want to delete the gathered data in the system (the persistent volumes) please use the following command make pv=true cleandocker (pv = persistent volumes). This form of the command will stop and delete the containers, the images and will also delete the persistent volumes.

MQTT Microservice#

The MQTT Microservice in Mainflux is special, as it is currently the only microservice written in NodeJS. It is not compiled, but node modules need to be downloaded in order to start the service:

cd mqtt
npm install

Note that there is a shorthand for doing these commands with make tool:

make mqtt

After that, the MQTT Adapter can be started from top directory (as it needs to find *.proto files) with:

node mqtt/mqtt.js

Troubleshooting#

Depending on your use case, MQTT topics, message size, the number of clients and the frequency with which the messages are sent it can happen that you experience some problems.

Up until now it has been noticed that in case of high load, big messages and many clients it can happen that the MQTT microservice crashes with the following error:

mainflux-mqtt   | FATAL ERROR: CALL_AND_RETRY_LAST Allocation failed - JavaScript heap out of memory
mainflux-mqtt exited with code 137

This problem is caused the default allowed memory in node (V8). V8 gives the user 1.7GB per default. To fix the problem you should add the following environment variable NODE_OPTIONS:--max-old-space-size=SPACE_IN_MB in the environment section of the aedes.yml configuration. To find the right value for the --max-old-space-size parameter you'll have to experiment a bit depending on your needs.

The Mainflux MQTT service uses the Aedes MQTT Broker for implementation of the MQTT related things. Therefore, for some questions or problems you can also check out the Aedes's documentation or reach out its contributors.

Protobuf#

If you've made any changes to .proto files, you should call protoc command prior to compiling individual microservices.

To do this by hand, execute:

protoc --gofast_out=plugins=grpc:. *.proto
protoc --gogo_out=plugins=grpc:. broker/*.proto

A shorthand to do this via make tool is:

make proto

N.B. This must be done once at the beginning in order to generate protobuf Go structures needed for the build. However, if you don't change any of .proto files, this step is not mandatory, since all generated files are included in the repository (those are files with .pb.go extension).

Cross-compiling for ARM#

Mainflux can be compiled for ARM platform and run on Raspberry Pi or other similar IoT gateways, by following the instructions here or here as well as information found here. The environment variables GOARCH=arm and GOARM=7 must be set for the compilation.

Cross-compilation for ARM with Mainflux make:

GOOS=linux GOARCH=arm GOARM=7 make

Running tests#

To run all of the tests you can execute:

make test

Dockertest is used for the tests, so to run them, you will need the Docker daemon/service running.

Installing#

Installing Go binaries is simple: just move them from build to $GOBIN (do not fortget to add $GOBIN to your $PATH).

You can execute:

make install

which will do this copying of the binaries.

N.B. Only Go binaries will be installed this way. The MQTT adapter is a NodeJS script and will stay in the mqtt dir.

Deployment#

Prerequisites#

Mainflux depends on several infrastructural services, notably NATS broker and PostgreSQL database.

NATS#

Mainflux uses NATS as it's central message bus. For development purposes (when not run via Docker), it expects that NATS is installed on the local system.

To do this execute:

go get github.com/nats-io/gnatsd

This will install gnatsd binary that can be simply run by executing:

gnatsd

PostgreSQL#

Mainflux uses PostgreSQL to store metadata (users, things and channels entities alongside with authorization tokens). It expects that PostgreSQL DB is installed, set up and running on the local system.

Information how to set-up (prepare) PostgreSQL database can be found here, and it is done by executing following commands:

# Create `users` and `things` databases
sudo -u postgres createdb users
sudo -u postgres createdb things

# Set-up Postgres roles
sudo su - postgres
psql -U postgres
postgres=# CREATE ROLE mainflux WITH LOGIN ENCRYPTED PASSWORD 'mainflux';
postgres=# ALTER USER mainflux WITH LOGIN ENCRYPTED PASSWORD 'mainflux';

Mainflux Services#

Running of the Mainflux microservices can be tricky, as there is a lot of them and each demand configuration in the form of environment variables.

The whole system (set of microservices) can be run with one command:

make rundev

which will properly configure and run all microservices.

Please assure that MQTT microservice has node_modules installed, as explained in MQTT Microservice chapter.

N.B. make rundev actually calls helper script scripts/run.sh, so you can inspect this script for the details.

Events#

In order to be easily integratable system, Mainflux is using Redis Streams as an event log for event sourcing. Services that are publishing events to Redis Streams are things service and mqtt adapter.

Things Service#

For every operation that has side effects (that is changing service state) things service will generate new event and publish it to Redis Stream called mainflux.things. Every event has its own event ID that is automatically generated and operation field that can have one of the following values: - thing.create for thing creation, - thing.update for thing update, - thing.remove for thing removal, - thing.connect for connecting a thing to a channel, - thing.disconnect for disconnecting thing from a channel, - channel.create for channel creation, - channel.update for channel update, - channel.remove for channel removal.

By fetching and processing these events you can reconstruct things service state. If you store some of your custom data in metadata field, this is the perfect way to fetch it and process it. If you want to integrate through docker-compose.yml you can use mainflux-es-redis service. Just connect to it and consume events from Redis Stream named mainflux.things.

Thing create event#

Whenever thing is created, things service will generate new create event. This event will have the following format:

1) "1555334740911-0"
2)  1) "operation"
    2) "thing.create"
    3) "name"
    4) "d0"
    5) "id"
    6) "3c36273a-94ea-4802-84d6-a51de140112e"
    7) "owner"
    8) "john.doe@email.com"
    9) "metadata"
   10) "{}"

As you can see from this example, every odd field represents field name while every even field represents field value. This is standard event format for Redis Streams. If you want to extract metadata field from this event, you'll have to read it as string first and then you can deserialize it to some structured format.

Thing update event#

Whenever thing instance is updated, things service will generate new update event. This event will have the following format:

1) "1555336161544-0"
2) 1) "operation"
   2) "thing.update"
   3) "name"
   4) "weio"
   5) "id"
   6) "3c36273a-94ea-4802-84d6-a51de140112e"

Note that thing update event will contain only those fields that were updated using update endpoint.

Thing remove event#

Whenever thing instance is removed from the system, things service will generate and publish new remove event. This event will have the following format:

1) 1) "1555339313003-0"
2) 1) "id"
   2) "3c36273a-94ea-4802-84d6-a51de140112e"
   3) "operation"
   4) "thing.remove"

Channel create event#

Whenever channel instance is created, things service will generate and publish new create event. This event will have the following format:

1) "1555334740918-0"
2) 1) "id"
   2) "16fb2748-8d3b-4783-b272-bb5f4ad4d661"
   3) "owner"
   4) "john.doe@email.com"
   5) "operation"
   6) "channel.create"
   7) "name"
   8) "c1"

Channel update event#

Whenever channel instance is updated, things service will generate and publish new update event. This event will have the following format:

1) "1555338870341-0"
2) 1) "name"
   2) "chan"
   3) "id"
   4) "d9d8f31b-f8d4-49c5-b943-6db10d8e2949"
   5) "operation"
   6) "channel.update"

Note that update channel event will contain only those fields that were updated using update channel endpoint.

Channel remove event#

Whenever channel instance is removed from the system, things service will generate and publish new remove event. This event will have the following format:

1) 1) "1555339429661-0"
2) 1) "id"
   2) "d9d8f31b-f8d4-49c5-b943-6db10d8e2949"
   3) "operation"
   4) "channel.remove"

Connect thing to a channel event#

Whenever thing is connected to a channel on things service, things service will generate and publish new connect event. This event will have the following format:

1) "1555334740920-0"
2) 1) "chan_id"
   2) "d9d8f31b-f8d4-49c5-b943-6db10d8e2949"
   3) "thing_id"
   4) "3c36273a-94ea-4802-84d6-a51de140112e"
   5) "operation"
   6) "thing.connect"

Disconnect thing from a channel event#

Whenever thing is disconnected from a channel on things service, things service will generate and publish new disconnect event. This event will have the following format:

1) "1555334740920-0"
2) 1) "chan_id"
   2) "d9d8f31b-f8d4-49c5-b943-6db10d8e2949"
   3) "thing_id"
   4) "3c36273a-94ea-4802-84d6-a51de140112e"
   5) "operation"
   6) "thing.disconnect"

Note: Every one of these events will omit fields that were not used or are not relevant for specific operation. Also, field ordering is not guaranteed, so DO NOT rely on it.

MQTT Adapter#

Instead of using heartbeat to know when client is connected through MQTT adapter one can fetch events from Redis Streams that MQTT adapter publishes. MQTT adapter publishes events every time client connects and disconnects to stream named mainflux.mqtt.

Events that are coming from MQTT adapter have following fields: - thing_id ID of a thing that has connected to MQTT adapter, - timestamp is in Epoch UNIX Time Stamp format, - event_type can have two possible values, connect and disconnect, - instance represents MQTT adapter instance.

If you want to integrate through docker-compose.yml you can use mainflux-es-redis service. Just connect to it and consume events from Redis Stream named mainflux.mqtt.

Example of connect event:

1) 1) "1555351214144-0"
2) 1) "thing_id"
   2) "1c597a85-b68e-42ff-8ed8-a3a761884bc4"
   3) "timestamp"
   4) "1555351214"
   5) "event_type"
   6) "connect"
   7) "instance"
   8) "mqtt-adapter-1"

Example of disconnect event:

1) 1) "1555351214188-0"
2) 1) "thing_id"
   2) "1c597a85-b68e-42ff-8ed8-a3a761884bc4"
   3) "timestamp"
   4) "1555351214"
   5) "event_type"
   6) "disconnect"
   7) "instance"
   8) "mqtt-adapter-1"